BUFFALO 3 TB Spare Replacement Hard Drive for DriveStation Quad, LinkStation Pro Quad and TeraStation (OP-HD3.0T/4K-3Y) - SATA - RoHS, TAA Compliance OP-HD3.0T/4K-3Y

BUFFALO 3 TB Spare Replacement Hard Drive for DriveStation Quad, LinkStation Pro Quad and TeraStation (OP-HD3.0T/4K-3Y) - SATA - RoHS, TAA Compliance

If the capacity is not available, a larger capacity drive can be used to replace a TeraStation hard drive. For example, if replacing a 500 GB hard drive in a TeraStation, customers can use a 1 TB model. Hard drive capacities and availability change from time to time, so in some cases a larger hard drive must be used as a replacement. If a larger hard drive is used in a RAID configuration, it will appear as the same size as the other hard drives in the array.

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Technical Specifications:
Storage Capacity: 3 TB
Platform Supported: PC
Maximum External Data Transfer Rate: 3072 MB/s (24 Gbit/s)
Drive Interface: SATA
Drive Interface Standard: SATA/300
SATA Pin: 7-pin
Drive Type: Internal
Form Factor: 3.5"
Height: 1.2"
Width: 4.1"
Depth: 6.7"
Weight (Approximate): 1.98 lb
Compatibility:

Buffalo Storage Arrays:

TeraStation ES, TeraStation III, TeraStation III iSCSI, TeraStation Pro, TeraStation Pro WSS
Environmentally Friendly: Yes
Environmental Certification: RoHS

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: